Cathodic Protection Products - Off-Shore
Amstel for Off-Shore
We have Amstels available for windfarms in IP67 enclosures.
Amstels are also available in EX enclosures for zone 1 & 2 areas.
Products
ICCP Amstel 1 N (New version)
Range 6 to 50V 1 to 15A <400W
The Amstel 1 Type C is a compact and robust switch mode power supply, forced cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
ICCP Amstel 1 N (replaced by a new type)
Range 6 to 50V 1 to 10A <200W
The Amstel 1 Type C is a compact and robust switch mode power supply, forced cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
ICCP Amstel 2 N
Range 8 to 60V 5 to 30A <500W
The Amstel 2 Type C is a compact and robust switch mode power supply, natrual cooled, specifically designed for Cathodic protection on low maintenace application. Standard SCADA RS485 MODBUS fieldbus.
ICCP Amstel 3 F
Range 8 to 60V 40 to 200A <2500W
The Amstel 3 Type C is a compact and robust switch mode power supply, forced cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
ICCP Amstel 3 N
Range 8 to 60V 10 to 60A <1000W
The Amstel 3 Type C is a compact and robust switch mode power supply, natural cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
ICCP Amstel 4 F
Range 8V to 60V 80A to 500A <7500W
The Amstel 4 Type C is a compact and robust switch mode power supply, forced cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
ICCP Amstel 4 N
Range 8...60V 15...100A <2000W
The Amstel 4 Type C is a compact and robust switch mode power supply, naterual cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
Parameterization for Amstels
Parameterization software for Amstel devices. With this software all registers of the Amstels, or other devices related to the Amstel Rectifiers, can be parameterized.
Options
-
AF1
Reverse air flow, bottom to top direction.
-
M1
Menu controlled with push buttons on top.
-
PU1
Cathodic protection Timer option.
-
RF1
Cathodic protection potential controlled on ON value reference cell can be any type as long the...
-
RF2
Cathodic protection potential controlled on OFF value reference cell can be any type as long the...
-
RF3
Cathodic protection potential controlled on ON and OFF value reference cell can be any type as...
-
RS1
RS485 Modbus RTU/ASCII open protocol easy to integrate with SCADA or other controls PLC etc.
-
TB1
Vertical mounting holes Top and Bottom
-
US1
USB parameterization option.