Range 6 to 50V 1 to 15A <400W
The Amstel 1 Type C is a compact and robust switch mode power supply, forced cooled, specifically designed for cathodic protection. Standard SCADA RS485 MODBUS fieldbus.
The Amstel Rectifier is Voltage and Current constant. The rectifier can be parameterized by the AM software RS485 or USB-B, and optionally parameterized using three push buttons by menu structure. The parameters can be protected by a PIN code to prevent unauthorized personnel to change settings.
Types
Voltage |
6V |
8V |
12V |
16V |
20V |
25V |
30V |
40V |
50V |
|
---|---|---|---|---|---|---|---|---|---|---|
1A | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ■ | |
2A | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ■ | |
5A | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ■ | |
10A | ■ | ■ | ■ | ■ | ■ | ■ | ||||
15A | ||||||||||
current |
Features
- Supply: 190V...230V.
- Modbus over RS485.
- RTU and ASCII protocol. 1200...115.200 baud (19.200 baud default).
- Auto low voltage at no load.
- Alarms on over-current, over-voltage.
Control and Display Panel
- Power LED - Communication LED - Output active LED - Error LED
|
|
Connection panelPower connector
Fieldbus
Input/Output DC output
Fuse for the power supply Standard air in. |
Specifications
Item | Minimal | Nominal | Maximal | Unit |
Environment temperature | -20 | +20 | +40 | oC |
Relative humidity | 10 | 60 | 90 | % |
Height | 175 | mm | ||
Width Horizonal version | 110 | mm | ||
Width Vertical version | 75 | mm | ||
Length Horizontal version | 220 | mm | ||
Length Vertical version | 244 | mm | ||
Weight | 2,5 | 3 | kg | |
Electrical | ||||
Line voltage [AC] depending on type | -5% | 220 | +5% | V |
Max output power (depending on type) | 400 | W | ||
Standby power incl. | 2 | W | ||
Input fuse 5x20mm Slow | 1.6 | A | ||
Accuracy | <0.2 | % |
PDN
PDN = AM1N-(DC Voltage)V-(DC Current)A-1-230V-CM1RF3RS1(Options)
Example
Amstel 1 16V 10A natural cooled 1ph 230Vac with modbus and Menu and ON/OFF potential control
AM1N-16V-10A-1-230V-CM1RF3RS1