Cathodic Protection Products - Ships
Amstel for Plating
 |
 |
The Amstels in this category are specifically designed for RTR machines in the lead frame or connector production.
Products
P Amstel 1
Range 6 to 50V 1 to 10A <200W
The Amstel 1 Type P is a compact and robust switch mode power supply, natrual cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 2
Range 6 to 50V 15 to 100A <1500W
The Amstel 2 Type P is a compact and robust switch mode power supply, forced cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 2C (New Product)
Range 8 or 16V 80A 50A 800W
The Amstel 2C Type P is a compact and robust switch mode power supply, IP67 enclosure natural cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 3
Range 6 to 50V 50 to 200A <2500W
The Amstel 3 Type P is a compact and robust switch mode power supply, forced cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 4
Range 4 to 50V 80 to 500A <7500W
The Amstel 4 Type P is a compact and robust switch mode power supply, forced cooled, specifically designed for plating machines, full control by MODBUS.
Parameterization for Amstels
Parameterization software for Amstel devices. With this software all registers of the Amstels, or other devices related to the Amstel Rectifiers, can be parameterized.
Options
-
AF1
Reverse air flow, bottom to top direction.
-
M1
Menu controlled with push buttons on top.
-
PU1
Cathodic protection Timer option.
-
RF1
Cathodic protection potential controlled on ON value reference cell can be any type as long the...
-
RF2
Cathodic protection potential controlled on OFF value reference cell can be any type as long the...
-
RF3
Cathodic protection potential controlled on ON and OFF value reference cell can be any type as...
-
RS1
RS485 Modbus RTU/ASCII open protocol easy to integrate with SCADA or other controls PLC etc.
-
TB1
Vertical mounting holes Top and Bottom
-
US1
USB parameterization option.