Plating Industry - Products - Hardchrome
Amstel for Hard Chromium
The Amstel with the optional polar changeover are optimized for Hard Chromium in combination with our ARC-P software. We can run the process including all monitoring.
We have Amstel systems operating in the aircraft field.
Products
P Amstel 2
Range 6 to 50V 15 to 100A <1500W
The Amstel 2 Type P is a compact and robust switch mode power supply, forced cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 2C (New Product)
Range 8 or 16V 80A 50A 800W
The Amstel 2C Type P is a compact and robust switch mode power supply, IP67 enclosure natural cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 3
Range 6 to 50V 50 to 200A <2500W
The Amstel 3 Type P is a compact and robust switch mode power supply, forced cooled, specifically designed for plating machines, full control by MODBUS.
P Amstel 4
Range 4 to 50V 80 to 500A <7500W
The Amstel 4 Type P is a compact and robust switch mode power supply, forced cooled, specifically designed for plating machines, full control by MODBUS.
Parameterization for Amstels
Parameterization software for Amstel devices. With this software all registers of the Amstels, or other devices related to the Amstel Rectifiers, can be parameterized.
Options
-
AF1
Reverse air flow, bottom to top direction.
-
M1
Basic menu control for Amstels.
-
PR1
Polar change with contactors.
-
PR2
Cathodic protection menu control for Amstels.
-
PR3
Polar electronic change over by mosfets .
-
PU1
Interrupt plating.
-
PU2
Forward Pulse output (Chopper).
-
RS1
RS485 Modbus RTU/ASCII open protocol easy to integrate with SCADA or other controls PLC etc.
-
TB1
Vertical mounting holes Top and Bottom
-
US1
USB parameterization option.