Plating Industry - Products - Leadframe

P Amstel 2C (New Product)

Range 8 or 16V  80A  50A 800W

 

The Amstel 2C Type P is a compact and robust switch mode power supply, IP67 enclosure natural cooled, specifically designed for plating machines, full control by MODBUS.

 

The Amstel Rectifier is Voltage and Current constant. The rectifier can be parameterized by the AM software RS485, and optionally parameterized using three push buttons by menu structure. The parameters can be protected by a PIN code to prevent unauthorized personnel to change settings.

Types 

Voltage

 

6V

8V

12V

16V

20V 

24V

30V

40V

50V

15A                    
20A                    
25A                    
40A                    
50A                  
60A                    
80A                  
100A                    
current                    

  

Features

  • Line Power supply specified by customer: 400V/415V/440V.
  • Modbus over RS485.
  • RTU and ASCII protocol.  1200...115.200 baud (19.200 baud default).
  • Contact failure detection.
  • Auto low voltage at no load.
  • Alarms on over-current, over-voltage. 

 

Control and Display Panel 

  • Display actual Current & Voltage display
  • Optional Menu
  • Status Leds

- Power LED 

- Communication LED

- Output active LED

- Error LED

  • IR communication for remote config

Connection panel

Power connector

  • Aux. power 190Vac..265Vac 1ph
  • Main power 3ph

Fieldbus

  • RS485 half duplex MODBUS

DC output

  • Plus terminal M8 hole for cable lug
  • Min terminal M8 hole for cable lug 

Specifications

 Item Minimal Nominal Maximal Unit
 Environment temperature -20 +20 +40 oC
 Relative humidity 10 60 90 %
 Height     60 mm
 Width     175 mm
 Length     338 mm
 Weight  5   7 kg
 Electrical        
 Line voltage [AC] depending on type -5% Line voltage +10% V
 Max output power (depending on type)     800 W
 Standby power incl.   2   W
 Accuracy    <0.1   

PDN

PDN = AM2C-(DC Voltage)V-(DC Current)A-3-400V-P(Options)

Example

Amstel 2C 16V 50A 3ph 400Vac with modbus and Menu

AM2F-16V-50A-3-400V-PM1R1

Options

  • AF1

    Reverse air flow, bottom to top direction. 

  • M1

    Basic menu control for Amstels.

  • PR1

    Polar change with contactors.

  • PR2

    Cathodic protection menu control for Amstels.

  • PR3

    Polar electronic change over by mosfets .

  • PU1

    Interrupt plating.

  • PU2

    Forward Pulse output (Chopper).

  • RS1

    RS485 Modbus RTU/ASCII open protocol easy to integrate with SCADA or other controls PLC etc.

  • TB1

    Vertical mounting holes Top and Bottom

  • US1

    USB parameterization option.