Cathodic Protection Products - Ships

Amstel for Batteries

 

The Amstels in this category are specifically designed for lead batteries charging and to maintain maximal battery life and condition. The Amstel is also capable to take over the power from the battery to act like a UPS system. The Amstel can be delivered in many line voltages. This type is often used in safety systems in emergence and ship installations.

 

The Amstels have many configurable charging curves, depending on the battery type. Some features are:

  • Boost charging.
  • Maintaining the batteries on its correct float voltage.
  • Alarms battery state.
  • Scada for integration with total system.

 


Products

Charger Amstel 2 FA

 

2V to 48V systems  20 to 100A <1500W

 

The Amstel 2 Type B is a compact and robust switch mode power supply, forced cooled, specifically designed for battery chargers, full control by MODBUS.

Read more ...

Charger Amstel 3 FA

 

2 to 48V systems  50 to 200A <2500W

 

The Amstel 3 Type B is a compact and robust switch mode power supply, forced cooled, specifically designed for battery chargers, full control by MODBUS.

Read more ...

Charger Amstel 3 FA HV

 

72V to 220V systems  10 to 30A <2500W

 

The Amstel 3 Type B HV is a compact and robust switch mode power supply, forced cooled, specifically designed for battery chargers, full control by MODBUS.

Read more ...

Charger Amstel 4 FA

 

2V to 48V  80 to 500A <7500W

 

The Amstel 4 Type B is a compact and robust switch mode power supply, forced cooled, specifically designed for battery chargers, full control by MODBUS.

Read more ...

Charger Amstel 4 FA HV

 

72V to 220V systems  30A to 100A <7500W

 

The Amstel 4 Type B is a compact and robust switch mode power supply, forced cooled, specifically designed for battery chargers, full control by MODBUS.

Read more ...

Parameterization for Amstels

Parameterization software for Amstel devices. With this software all registers of the Amstels, or other devices related to the Amstel Rectifiers, can be parameterized. 

Read more ...

Options

  • AF1

    Reverse air flow, bottom to top direction. 

  • M1

    Menu controlled with push buttons on top.  

  • PU1

    Cathodic protection Timer option.

  • RF1

    Cathodic protection potential controlled on ON value reference cell can be any type as long the...

  • RF2

    Cathodic protection potential controlled on OFF value reference cell can be any type as long the...

  • RF3

    Cathodic protection potential controlled on ON and OFF value reference cell can be any type as...

  • RS1

    RS485 Modbus RTU/ASCII open protocol easy to integrate with SCADA or other controls PLC etc.

  • TB1

    Vertical mounting holes Top and Bottom

  • US1

    USB parameterization option.